How To Install Portable Device Driver Windows 7

Reinstalling USB Driver on Windows 7

Follow the steps below to manually install the USB commuter using the Windows 7 Device Manager.

i. Correct click on [My Reckoner] and select [Open]. Click [System properties], and open the [Device Managing director].

2. Connect the data logger or data collector to your PC with a USB cable. If the PC does not recognize the recently continued device, an [Unknown device] bulletin volition appear.

* If that message does non announced, please check to make sure there are batteries in the continued device or that the device's power is ON. If the message withal does not appear, it is possible that something is wrong with the USB terminal on the PC or on the device, or a cleaved wire in the USB cablevision.
* If the driver has been installed properly [USB Recorder Com] will appear in the device managing director every bit shown in Step vii below. (For TR-7Ui/7wf/7nw)

3. Right click on [Unknown device] and select [Update Driver Software(P)].

4. After the "Update Driver Software" window has appeared, click "Browse my computer for commuter software".

5. Specify the location of the device driver. Adjacent depending on the circumstances select one of the following:

A: Select to install the driver from CD-ROM
B: Select to install from the folder where the software was installed on your PC

A: Installing the driver from CD-ROM

Click the [Browse] push and find the CD-ROM drive; then select the folder entitled [Device Commuter].

For example, if the CD ROM drive is "D:" so information technology should be "D: Device Driver". If you are using RTR-57U, then select the binder [RTR-57U] and if you are using TR-50U then select the folder [TR-50U].

B: Installing from the folder where the software was installed

Click the [Browse] push button and select the driver folder for the device from the folder into which the software was installed (if RTR-l and so select [Driver RTR-50]).

EX: C:\Plan Files\RTR-50 for Windows\Driver RTR-50
* Place a cheque side by side to "Include subfolders".

half dozen. By clicking [Next], a confirmation window like the i below volition appear. Click [Install]. After the message "Windows has successfully updated driver software" appears, click [Close].

7. Confirm in the Device Manager that the display looks like beneath. If there is no trouble, then the driver has been installed properly.

TR-7Ui Series, TR-7wf/nw Serial

TR-50U2, TR-57DCi

That completes the installation.
Delight reconfirm that communication via USB tin be carried out.

Back to Other Information

Source: https://tandd.com/information/reinstall-usb-win7.html

Posted by: beamonsomint.blogspot.com

Share this post